Chapter 3: Working with Waypoints 51
3.2 Placing a Waypoint
A waypoint can be placed at the cursor position, the boat’s position or at a
position of your choosing (using lat/long coordinates). All waypoints can also be
used in the creation of routes.
When waypoints are placed they are given a default symbol and name. You can
change this default name or the symbol assigned to individual waypoints, if
desired. See “Editing a Waypoint“ on page 57.
... at the cursor
To place a waypoint at the cursor position:
1. Move the cursor to the desired position for the waypoint.
2. Press WPTS/MOB.
3. Press WPT AT CURSOR:
• A waypoint is placed at the cursor position with a default name and sym-
bol.
• The Edit Waypoint box is displayed, enabling you to change waypoint
details. For more information refer to “Editing a Waypoint“ on page 57.
4. To accept the default details press ENTER. The Waypoint List appears, dis-
playing your newly created waypoint.
5. Press ENTER or CANCEL. The Waypoint List is removed.
... at current position
To place a waypoint at the vessel’s current position:
1. Press WPTS/MOB.
2. Press WPT AT VESSEL
• A waypoint is placed at your boat’s position.
D9808-1
REV & EDIT
WAYPOINTS...
WPT AT
POSITION...
WPT AT
VESSEL
WPT AT
CURSOR
GOTO WPT
OPTIONS...
D9809-1
WPT AT
CURSOR
D9810-1
WPT AT
VESSEL
81295.book Page 51 Wednesday, December 20, 2006 2:48 PM
To Next Page
Loading...
