Chapter 4: Using the Chartplotter 85
4.8 Using Tracks
A track is an on-screen trail that represents the course you have taken. This trail is
made up of a series of track points that are created automatically. You can save
the track to create a permanent record of where you have been. All track functions
described in this section are accessed via the TRACKS soft key.
.
Tracks can be used to:
• Review where you have been
• Retrace your original journey by converting the track to a route and automat-
ically reversing it
Your A60 can store up to 16 tracks, using up to 1000 track points each. If
necessary, you can save tracks to a CF card (see “Saving and Retrieving Data“ on
page 44). You also have the option to personalize your tracks by renaming them
or changing their color.
D9856-1
4nm North-Up (Relative Motion) Local
GOTO
...
GOTO.
..
TRACKS
...
TRACKS.
..
PRESENT
...
PRESENT
...
FIND SHIP
FIND SHIP
ROUTES
...
ROUTES.
..
6.0nm North-Up (Relative Motion)
Csr Pos N 50°47.585 W 000°55.800
021°T
0.72nm
81295.book Page 85 Wednesday, December 20, 2006 2:48 PM
To Next Page
Loading...
