6-14 DSM250 Digital Sounder Module
2. Press the MAKE NEW WAYPOINT soft key followed by the LAT/
LONG soft key; the WPT POSITION (LAT/LONG) screen is displayed,
with it’s associated soft keys. The waypoint is placed at the cur-
rent vessel position, or if not available, the cursor position.
3. You can use the soft keys to edit the waypoint position.
It is added to the Waypoint List and named with the next available
number.
To return to the default soft key display, press ENTER or CLEAR
twice.
For full details on working with waypoints, refer to the handbook
for your PLUS Series Radar, Chartplotter, or Fishfinder display.
6.5 MOB
If you lose a person or object overboard and need to return to the
location, you should use the Man Overboard (MOB) function.
You can select the type of data used for the MOB position using
the set up menus (see Section 4.3).
GOTO
WAYPOINT
EDIT
WAYPOINT
MAKE NEW
WAYPOINT
WAYPOINT
TRANSFER
D4262-2
WAYPOINT LIST
SYMBOL NAME
WAYPOINT 001
WAYPOINT 002
WAYPOINT 003
WAYPOINT 004
WAYPOINT 005
50°21^966N
001°20^368W
POSITION
BRG _186°
RNG _21.0nm
TEMP
---°
C
DEPTH
---
m
DATE
--/--/--
TIME
--:--:--
MAKE NEW
WAYPOINT
To Next Page
Loading...
