Raymarine DSM250 - Switching between Sounder and Other Modes

5-12 DSM250 Digital Sounder Module
Figure 5-6: Vertical Half-Screen Window C
Returning to the Full-Screen Display
To return to the full-screen display you can turn windows off, as
previously described. To return to full-screen display:
➤ Press and hold the DISPLAY key for 2 seconds to return to the
currently selected full-screen (upper window) display.
Switching Between Sounder and Other Modes
When you have both sounder and chart displayed in half-screen
windows the soft key CHRT SNR lets you toggle operating control
between the sounder and the chart window.
➤ To change the active window when you are displaying the sonar/chart
horizontal split window, press the CHRT SNR soft key to toggle control
between the sounder and chart display. The current active display is
highlighted in gray (monochrome display) or red (color LCD) on the
CHRT SNR label and the cursor appears in that window.
ZOOMFREQUENCY
BTM.LOCK A-SCOPE
AUTO GC F
50kHz
0
WAYPOINT
Rng 2.95nm
Brg 093°T
DEPTH
ft
SPEED OVER GROUND
kts
COURSE OVER GROUND
T
20
40
D6209-1
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
60
60
60
DISPLAY
ZOOM MORE¬FREQUENCY
D5013-1
CHRT SNR