1-6 DSM250 Digital Sounder Module
You can customize the sounder by choosing what is displayed and
how it is displayed (including language and units). For example,
you can set the scroll speed of the bottom graph display, and you
can select the range to adjust the depth displayed.
You can view the cursor position and a variety of data (such as
speed and depth) from the transducer and other equipment in user-
selectable data boxes. These data boxes can be moved around the
screen and they can be switched on or off.
Chapter 3 includes details on adjusting the display, other set up
options are described in Section 4.4.
Figure 1-3: Typical Display in Sonar Mode
D6181-1
ZOOMFREQUENCY
BTM.LOCK A-SCOPE
AUTO GCRZFH
50kHz
0
SD
60
20
40
18
22
38
35
36
33
32
36
37
42
ft
Gain
Color gain
Range
Cursor,
controlled
by trackpad
Auto
Mode
Indicators
Water surface
Frequency
Target Depth ID On
Alarm enabled
Frequency
Power
Zoom
Shallow, Deep
Alarm
Indicators
Fish
Depth markers
Target image (fish arch)
Range
Bottom depth
Target image depth
To Next Page
Loading...
