101 Chapter 9: Troubleshooting
Warnings and Errors
Off Off < 2 minutes
Off for > 2minutes
•Startup
•No power
•
Amber On steady • Power on
• Lamp test
Amber Flashing x 1 • Input transducer
Amber Flashing x 2 • No network / cable unplugged
Amber Flashing x 3 • Over temperature warning
Amber Flashing x 8 • Watchdog restart
Amber/Red Alternating 750/250 ms • Software upgrade. This condition remains until a valid application is available
from Flash
Red Flashing x 1 • Voltage error
Red Flashing x 3 • Over temperature error
Red Flashing x 4 • Flash write error
Red Flashing x 5 • No application programmed
Red Flashing x 8
(May be followed by Flashing amber)
• Hardware read failure
Color Operation Causes
To Next Page
Loading...
