Raymarine G-Series system - 4.12 NMEA 2000 Connections

55 Chapter 4: Cables and connections
4.12 NMEA 2000 connections
NMEA 2000 devices are connected using the SeaTalk
ng
bus. The
G-Series system can display data received from NMEA 2000
devices (e.g. for displaying data from compatible engines).
You may connect NMEA 2000 compatible devices using appropri-
ate adaptor cables.
NMEA 2000 cable
The following cable is used to connect the NMEA 2000 devices to
the SeaTalk
ng
bus:
See also
For more information refer to the separate SeaTalk
ng
reference
manual.
Connection /
Cable
Part No Notes
1.5 m (4.9 ft)
SeaTalk
ng
to DeviceNet
male
A06046
SeaTalk
ng
to DeviceNet cable
SeaTalk
ng
backbone
NMEA 2000
equipment
(e.g. engine via
appropriate
manufacturers
interface)
D10599-1