Raymarine gS Series - 20.4 Customizing the data application

20.3 Selectingdatapages
Toselectdatapagesusinganon-touchmultifunction
displayfollowthestepsbelow.
Fromthedataapplication:
1.MovetheJoystickDowntogotothenextpage,
or
2.MovetheJoystickUptogotothepreviouspage.
20.4Customizingthedataapplication
Youcancustomizethedataapplicationtoshowthe
systemandinstrumentdatathatyourequire.
Inadditiontodisplayingthedefault,pre-congured
datapagesinthedataapplication,youcanalso:
•Changetheorderdatapagesappear.
•Customizedatapagescontenttoyourspecic
requirements.
•Renamethedatapages.
•Addnewcustomdatapages.
•Deleteexistingdatapages.
•Setboatdetailssuchasnumberofengines,fuel
tanks,andbatteries.
•SetthemaximumengineRPMrange.
•Changecolortheme.
•Changetheunitsofmeasurement.
•Resetminimumandmaximumreadings.
•Resetallpagestodefault.
Changingdatapageorder
Youcanchangetheorderthatdatapagesappear.
Fromthedataapplication:
1.Scrolltothedatapageyouwanttomove.
2.SelectMenu.
3.SelectEditPage.
Theeditpagemenuisdisplayed.
4.SelectMovePageUporMovePageDown.
Eachtimemovepageupormovepagedownis
selectedthedatapagewillbemoved1spaceup
ordowninthedataapplication.
Customizingdatapagecontentusing
touch
Ontouchscreenmultifunctiondisplaysyoucan
customizeadataitembypressingandholdingon
theitemonscreen.
FromtheDataapplication:
1.Displaythedatapagethatcontainsthedataitem
youwanttochange.
2.T ouchandholdyourngeronthedataitem.
Afterapproximately3secondsthedataitemis
highlightedandtheSelectDataCategorymenu
isdisplayed.
3.Navigatethemenutolocatethedataitemyou
wanttouse.
4.Selectthedataitem.
Theselecteddataitemisnowdisplayedinplace
oftheoriginaldataitem.
Customizingdatapagecontent
Fromthedataapplication:
1.SelectMenu.
2.SelectEditPage.
3.Selectthecellyouwanttochange.
4.SelectSelectDataCategory.
Dataapplication
285