Raymarine gS Series - Page 348

Fordetailsonhowtoselectatargetto‘slewto’refer
totheradarandchartsectionsofyourmanual.
Thethermalcameracanalsoautomaticallyslewto:
•MOBtarget
•DangerousAIStarget
•DangerousMARPAtarget
Optionstoenableordisabletheautomaticslew
optionsareavailableinthethermalcamera
application
Settingthecamera'sheightabovesealevel
Toensurethatthethermalcamera’salignmentcan
besetcorrectlytheheightofthecameraabovesea
levelmustbeset.
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectSlewSettings.
TheSlewsettingspageisdisplayed.
4.SelectCameraheightabovesealevel.
TheCameraheightabovesealevelpopupis
displayed.
5.Adjustthevaluetotherequiredsetting.
Aligningthethermalcamerahorizontally
Ifyoundthatslewtocueobjectsareconsistently
toofarleftorrightonthescreenthenyoucan
makeneadjustmentstothecamerasalignmentby
followingthestepsbelow.
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectAligncamera.
TheAligncameratoboatpopupisdisplayed.
4.Adjustthevaluetotherequiredsetting.
Thisvaluewilladjustthecamera’soffsetposition
toportorstarboard.
Aligningthethermalcameraselevation
Ifyoundthatslewtocueobjectsareconsistently
tooloworhighonthescreenthenyoucanmakene
adjustmentstothecamerasalignmentbyfollowing
thestepsbelow.
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectElevAlign:.
TheAligncameratoboatpopupisdisplayed.
4.Adjustthevaluetotherequiredsetting.
Thisvaluewilladjustthecamera’soffsetposition
toportorstarboard.
Enabling/disablingautomaticslewtocue
Fromthethermalcameraapplication:
1.SelectMenu.
2.SelectCameraSet-up.
3.SelectSlewSettings.
TheSlewsettingspageisdisplayedwhich
includesthefollowingautoslewoptions:
•AutoSlewtoMOB
•AutoSlewtoDangerousAIStarget
•AutoSlewtoDangerousMARPAtarget
4.Selecttherelevantoption.
Selectinganoptionfromthelistwillswitchthe
autoslewoptionforthatitemOnorOff.
348
gSSeries