Raymarine p70r - Commissioning - SPX and SmartPilot Systems

ItemDescriptionOptions
Auto
release
Autoreleaseallowsyouto
overridethepilotbytakinghold
ofthewheelortiller.Whenyou
releasethewheelortiller,the
pilotwillreturntothelastlocked
heading.
Note:OnlyavailableonS1,
S2,orS3coursecomputers
onlywithdrivetypesettoI/O
stern.
•Enable(default)
•Disable
Calibration
lock
Thecalibrationlockisused
tolockoutspeciccalibration
settingswhichifchangedmay
requirere-commissioningofthe
autopilotsystem.Ifyoursystem
hasbeendealerinstalledthen
thelockmaybeturnedon.
•On
•Off(default)
Caution:Vesselsettingsdetermine
otherparameters
ifVesselTypeischangedafteryouhavecompleted
theAutopilotcommissioning.Thiswillreturnthe
settingstodefaultandtheDocksideandSeatrial
calibrationwillhavetobecarriedoutagain.
6.2Drivesettings
VesselsettingscanbeaccessedfromMainmenu>Setup>Auto
pilotcalibration>Drivesettings.
Note:WhenconnectedtoaSeaT alksystemthevesselsettings
listedbelowarepartoftheDealersettingsmenu,Mainmenu>
Setup>Autopilotcalibration>Dealersettings.
Note:Limitsaresetbytheinstalledcoursecomputerandso
notalllimitsmaybeavailable.
ItemDescriptionLimits
Rudder
gain
Ruddergainisameasureof
howmuchhelmtheSmartPilot
willapplytocorrectcourse
errors.Thehigherthesetting
themorerudderwillbeapplied.
Theruddergainsettingisset
automaticallyaspartofthe
Autolearnprocess.
•1—9
Counter
rudder
Counterrudderistheamount
ofruddertheSmartPilotsystem
appliestotrytopreventthe
vesselfromyawingoffcourse.
Highercounterruddersettings
resultinmorerudderbeing
applied.
•1—9Donotsetto0.
Adjustsettings
49