Chapter 2: Installation 3
2 Installation
Chapter 2: Installation
The sections in this chapter explain how to install the Smart Heading
System and connect it to Pathfinder Plus units.
WARNING: Calibration requirement
You MUST calibrate the Smart Heading System after installation
using a suitable Raymarine autopilot or Pathfinder Plus display (see
Chapter 3: Calibration).
Note: Refer to the Appendix first if you are connecting the GyroPlus 2
unit to a Raymarine autopilot.
Section Page
Planning the installation page 4
Installing the GyroPlus 2 unit page 8
Installing the fluxgate compass page 12
Connecting to Pathfinder Plus page 16
81198_1.book Page 3 Monday, February 11, 2002 8:36 AM
To Next Page
Loading...
Need help?
General
