5.
1Controlsandinterface
Thecontrolsandinterfaceavailableareasfollows:
Basestation
1.Built-inspeak
er
2.R otaryknobwithcenter OKpushbutton—Press
knobintoaccessmenuandDSCfunctionsand
toconfirmselections.Turnrotaryclockwiseor
anti-clockwisetomoveupanddownthroughmenu
itemsortochangechannelfromtheHomescreen.
3.LCD
4.
V OL/SQ—T urnknobtoadjustvolumeorsquelch
upanddown.Presscenterbuttontoswitchbetween
volumeandsquelchcontrol.
5.DIS TRESS—Pushupthespringloadedcoverand
pressthisbuttontomakeaDSCdistresscall.
6.16/+—Whenpoweredonpresstoswitchbetween
prioritychannels.
7 .P ower—Presstopowertheuniton.Pressandhold
for3secondstopowertheunitoff.Momentary
presstoaccesstheshortcutlist.
8.Back—Movebackthroughmenuoptions.
Fistmic
1. PTT(PushtoT
alk)—Pressandholdtosendavoice
message.Releasetoreturntoreceivemode.
Note:Themaximumtransmittimeislimitedto5
minutestopreventun-intentionaltransmissions
fromoccupyingtheVHFchannel.
2.Speak
er
3.Microphonelocation
4.
16/+—Whenpoweredonpresstoswitchbetween
prioritychannels.
5.HI/LO—PresstoswitchbetweenHigh(25W)and
low(1W)transmitpower.
6.
ChannelUp/ChannelDown—Changesthe
channelupordown.
5.2Handsetcontrols
TheHandset’scontrolsareshownbelow.
1. Power—Presstopowerthehandseton.Press
andholdfor3secondstopowerthehandsetoff.
Momentarypresstoaccesstheshortcutlist.
2. PTT(PushtoTalk)—Pressandholdtosendavoice
message.Releasetoreturntoreceivemode.
Note:Themaximumtransmittimeislimitedto5
minutestopreventun-intentionaltransmissions
fromoccupyingtheVHFchannel.
3.Microphonelocation
4. ChannelUpand ChannelDown—Changestothe
nextorpreviousVHFchannel,alsousedtoselector
adjustsettingoptionsinthemenu.
5.LCDscreen
6. Back—Gotothepreviousmenu/screen.Pressand
holdtoreturntotheHomescreen.
7. OK/menubutton—Pressbuttontoaccessmenu/
DSCfunctionsandtoconfirmselections.
8.16/+—Whenpoweredonpresstoswitchbetween
prioritychannels.
42
81381-1-Ray53_63_73_Install_and_Ops_PRINT.pdf 42 6/13/2018 2:30:12 PM