5.
12Selectinganetworktype
Whenconnectingyourradiotootherdevicesitis
importanttoensureyouselectthenetworkconnection
andtypethatyouwantdatatobetransmittedover.
FromtheMainmenu:
1.Select
Set-up.
2.SelectNetworkoutput.
Thefollowingnetworktypesareavailable:
•NMEA2000(default)
•0183Highspeed
•0183Stdspeed
3.Selectthenetworktyperelevanttothedevices
connectedtoyourradio .Ifyourradioisnot
connectedtoanyotherdevicesanyoptioncanbe
selected.
Selecting 0183Stdspeedwilldisablethebuilt-inAIS
receiver,whereapplicable.
The Networkoutputsettingdeterminesthebaudrate
oftheNMEA0183input:
Networkoutputsetting
NMEA0183inputbaud
rate
NMEA2000
S tandardspeed(4,800)
NMEA0183HighSpeed
Highspeed(38,400)
NMEA0183S tandard
Speed
Standardspeed(4,800)
5.
13EnteringyourMMSI
number
ToprogramyourradiowithyourMMSInumberfollow
thestepsbelow.
FromtheSet-upmenu:( Menu>Set-up)
1.SelectDSCset-up.
2.SelectMMSI.
TheMMSIrequiredmessagewillbedisplayedifno
MMSInumberhasbeenset.
3.Select Yes.
4.Usethe Rotaryknoborthe ChannelUpand
ChannelDownbuttonsonaRaymichandsetto
cyclethroughtheavailablenumbersandpress
OK
toconfirmeachnumberandmovetothenextdigit.
Y oushouldonlyentertheunique9digitMMSI
numberprovidedbyyourlicensingauthority.
MMSInumbersstartingwitha‘0’areonlyusedfor
groupsandcoaststations.Ifyouentera‘0’asthe
firstdigittheradiowillassumeyouareenteringa
coaststationMMSIandautomaticallyassigna‘0’as
theseconddigit;thisistoensureagroupMMSIis
notenteredastheradio’suniqueMMSI.
5.Pressthe Backbuttonatanytimetoeditdigitsyou
havealreadyentered.
6.Pressandholdthe
OKbuttontodisplayoptionsto
Movecursorbackandforwardthroughthedigits.
7
.Whenthefinaldigitisconfirmedselect
DONE.
Example
8.TheMMSIisdisplayedonscreen,checkthatitis
correct,then:
i.Select Yes–Save,or
ii.ifthenumberenteredisnotcorrectselect No–
Retry.
Caution:MMSIandATISID
entry
YoucanonlyentertheMMSInumberand
ATISIDonce!
IfyoustoreanincorrectMMSInumberor
ATISIDinyourproduct,itwillhavetobe
resetbyanauthorizedRaymarine
®
dealer.
Gettingstarted
49
81381-1-Ray53_63_73_Install_and_Ops_PRINT.pdf 49 6/13/2018 2:30:12 PM