Raymarine RAY73 - Changing the Radio Region; Switching between High and Low Transmit Power; GNSS (GPS) Set up; Enabling and Disabling the Internal GNSS (GPS)

5.
15Changingtheradioregion
PriortousingtheradioyoumustsettheFrequencyband
totheregionyourradiowillbeusedin.
FromtheMainmenu:
1.Select Set-up.
2.SelectChannelset-up.
3.Select
Frequencyband.
4.Selecttherelevantregionfromthelist.
Theavailableoptionsare:
•International
•USA
•Canada
AniconisdisplayedontheHomescreenthatidentifies
whichregionhasbeenset.
5. 16Switchingbetweenhigh
andlowtransmitpower
Y oucanswitchtransmitpowerusingtheHI/LObutton
ontheHandset/Fistmic.
Thetransmitpowercanalsobechangedfromthe
Set-upmenu: Menu>Set-up
1.SelectP
oweroutput.
SelectingthePoweroutputoptionwillswitch
betweenHigh(25watt)andLow(1watt)power
output.
5.17GNSS(GPS)setup
IfyourradiohasaGNSS(GPS)positionfixthenthe
followinginformationcanbedisplayed:
•latitude
•longitude
•UTCtime
•COGandSOG
Whenpositiondataisavailablethesatelliteiconis
displayedonscreen.
Ifnopositiondataisavailablethenthelatitude,longitude
andtimecanbeenteredmanuallysothatitcanbe
includedinDSCdistresstransmissions.
Positiondatareceivedfromothervesselscanbe
displayedonaconnectedRaymarine®multifunction
display.
Enablinganddisablingtheinternal
GNSS(GPS)
Fromthe GPSset-upmenu: Menu>Set-up>GPS
set-up
1.Select IntegratedGPS.
Selecting IntegratedGPSwillswitchtheradio’s
internalGNSSreceiverOnandOff.
Switchingbetweeninternaland
externalantenna
Y ourradio’sbuilt-inGNSS(GPS)receiverincludesand
internalantenna,toimproveperformanceyoucan
connectanexternalantenna.Y oumustselectwhich
antennayouareusing.
Fromthe GPSset-upmenu: Menu>Set-up>GPS
set-up
1.Select GPSantenna.
Selecting GPSantennawillswitchbetweenthe
internalantennaandexternalantenna.
Gettingstarted
51
81381-1-Ray53_63_73_Install_and_Ops_PRINT.pdf 51 6/13/2018 2:30:13 PM