Raymarine RAY91 - Mounting

Productdimensions-R
aymichandset
TheRaymichandsetdimensionsforbothcradle
mountingandclipmountingareprovided.
TheR
aymichandsetisfittedwithacoiledcable.Ensure
sufficientspaceisavailablebelowthedesiredmounting
areatoaccommodatethecable.
3.4Mounting
Toolsrequiredforinstallation
1.P
owerdrill
2.Pozi-drivescrewdriver
3.Adhesivetape
4.Suitablesizedrillbit
5.89mm(3½in)Holesaw(usedforspeakermounting)
6.File(forspeakercut-out)
MountingtheBasestation
FollowthestepsbelowtomounttheBasestation.
BeforemountingtheBasestationensurethatyouhave:
•selectedasuitablelocation(aclear,flatsurfaceis
required).
•identifiedthelocationforadditionalcomponents,such
astheHandsetorSpeakeretc.
•identifiedtherelevantcableconnectionsandroute
thatthecableswilltake.
1.Usingthesuppliedmountingtemplate
,markthe
locationofthefixingholesonthemountingsurface.
2.Drillholesforthemountingfixingsusingadrillwith
asuitablesizeddrillbit.
3.Screwthefixingsapproximatelyhalfwayintothe
holesinthemountingsurface.
4.PlacetheBasestationoverthefixingsscrewsand
pushdowntolockintoposition.
5.Fullytightenthescrews.
6.Connectthenecessarycables.
22
81377-1-en_US_PRINT.pdf 22 12/21/2017 9:05:36 PM