Raymarine RAY91 - Entering Your M MSI N Umber; Entering Your M MSI N Umber O N; Selecting a Network Type; Switching on the AIS Receiver O N

5.8S
witchingontheAIS
receiver
Ifyourradioincludesabuilt-inAISreceiverthenitcan
beenabledanddisabledasfollows:
FromtheMainmenu:
1.Select
Set-up.
2.SelectAIS.
3.SelectOntoswitchthereceiveron,orselectOffto
switchthereceiveroff
.
5.9Selectinganetworktype
Whenconnectingyourradiotootherdevicesitis
importanttoensureyouselectthenetworkconnection
andtypethatyouwantdatatobetransmittedover.
FromtheMainmenu:
1.Select
Set-up.
2.SelectNetworkoutput.
Thefollowingnetworktypesareavailable:
•NMEA2000(default)
•0183Highspeed
•0183Stdspeed
3.Selectthenetworktyperelevanttothedevices
connectedtoyourradio.Ifyourradioisnot
connectedtoanyotherdevicesanyoptioncanbe
selected.
Selecting0183Stdspeedwilldisablethebuilt-inAIS
receiver,whereapplicable.
TheNetworkoutputsettingdeterminesthebaudrate
oftheNMEA0183input:
Networkoutputsetting
NMEA0183inputbaud
rate
NMEA2000
Standardspeed(4,800)
NMEA0183HighSpeed
Highspeed(38,400)
NMEA0183S
tandard
Speed
Standardspeed(4,800)
5.
10EnteringyourMMSI
number
ToprogramyourradiowithyourMMSInumberfollow
thestepsbelow.
FromtheSet-upmenu:(Menu>Set-up)
1.Select
DSCset-up.
2.SelectMMSI.
TheMMSIrequiredmessagewillbedisplayedifno
MMSInumberhasbeenset.
3.SelectY
es.
4.Usethe
R
otaryknobtocyclethroughtheavailable
numbersandpress
OKtoconfirmeachnumberand
movetothenextdigit.
Y oushouldonlyentertheunique9digitMMSI
numberprovidedbyyourlicensingauthority.
MMSInumbersstartingwitha‘0’areonlyusedfor
groupsandcoaststations.Ifyouentera‘0’asthe
firstdigittheradiowillassumeyouareenteringa
coaststationMMSIandautomaticallyassigna‘0’as
theseconddigit;thisistoensureagroupMMSIis
notenteredastheradio’suniqueMMSI.
5.PresstheBackbuttonatanytimetoeditdigitsyou
havealreadyentered.
6.PressandholdtheOKbuttontodisplayoptionsto
Movecursorbackandforwardthroughthedigits.
Gettingstarted
39
81377-1-en_US_PRINT.pdf 39 12/21/2017 9:05:37 PM