Raymarine RAY91 - Initial S Tartup; Selecting a Language; Selecting a Network Type

•theSharebrightnesssettingsettoOnforallunits
inthebrightnessgroup
.
•unitstobeassignedtoNetworkGroups.
•allthedisplaysinthatgrouptobesynchronized.
EnablingSharedBrightness
Fromthe
DisplaySet-upmenu:(Menu>Set-up>
DisplaySet-up).
1.SelectSharedBrightness.
2.SelectSharedBrightnessagaintoenableShared
Brightness.
IfSharedBrightnessisalreadyenabledthen
selectingthismenuitemwilldisableShared
Brightness.
3.SelectGroup.
4.Selectthegroupthatyouwanttoassigntheradioto.
AdjustingtheBrightnesssettingwillnowchangethe
brightnessofallproductsassignedtothatgroup.
5.6Initialstartup
Unlessyourradiohasbeenpre-programmed;thefirst
timeyoupower-upyourradioyouwillberequestedto
selectcertainoptions.WiththeexceptionofyourMMSI
andATISID,youwillalsoberequestedtoenterthese
optionsafterafactoryreset.
Afteracknowledgingthestartupscreen,unless
previouslysetyouwillbepromptedtomakethe
followingselections:
1.Languageselection—See5.7Selectingalanguage
foravailablelanguages.
2.TurnonAISreception(Ray70andRay91only)—
Enablesthebuilt-inAISreceiver.Thisstepisonly
applicabletoradioswithabuilt-inAISreceiver.
See5.8SwitchingontheAISreceiverformore
information.
3.Selectnetworktype—Selectswhichconnectionto
transmitAISandDSCinformationon,toconnected
equipment.ThisstepisonlyapplicableiftheAIS
receiverwasturnedoninthepreviousstep.See5.9
Selectinganetworktypeforavailableoptions.
4.EnterMMSInumber—RequiredtoenableDSC
functions.Thisoptionisnotrequiredafterafactory
reset,oriftheradiohasbeenpre-programedin
MARCOM-Cmode,orhasATISenabled.See5.10
EnteringanMMSInumberformoreinformation.If
notalreadyselectedyouwillalsobepromptedto
selectyournetworktype.
5.EnterATISID—Requiredwhentheradiowillbe
usedintheinlandwaterwaysofEurope.Thisstepis
onlyapplicableiftheradiohasbeenpre-programed
inMARCOM-Cmode.See5.11EnteringanATISID
formoreinformation.
6.Frequencybandselection—Setstherelevant
channelsforyourregion.Thisstepisnotapplicable
iftheradiohasbeenpre-programedinMARCOM-C
mode.See5.12Changingtheradioregionformore
information.
5.7Selectingalanguage
Thelanguagetheradiousescanbechanged.
FromtheMainmenu:
1.Select
Set-up.
2.SelectL
anguage.
Thelanguagesavailableare:
•English(default)—English
•Español—Spanish
•Français—French
•Deutsch—German
•Italiano—Italian
3.Selectthelanguagethatyouwanttheradiotobe
setto
.
TheUserinterfacelanguageischangedtotheselected
language.
38
81377-1-en_US_PRINT.pdf 38 12/21/2017 9:05:37 PM