Raymarine RAY91 - Aymic Handset C Ontrols; Powering the Base Station; R Aymic Handset C Ontrols

5.
1Raymichandsetcontrols
TheRaymichandset’scontrolsareshownbelow.
1.P
ower—Presstopowerthehandseton.Press
andholdfor3secondstopowerthehandsetoff.
Momentarypresstoaccesstheshortcutlist.
2.
PTT(PushtoT
alk)—Pressandholdtosendavoice
message.Releasetoreturntoreceivemode.
Note:Themaximumtransmittimeislimitedto5
minutestopreventun-intentionaltransmissions
fromoccupyingtheVHFchannel.
3.Microphonelocation
4.V
olumeUpand
V
olumeDown—Presstoadjust
volumeorsquelchupordown.
5.LCDscreen
6.
Back—Movebackthroughmenuoptions.
7
.
OK/menubutton—Pressbuttontoaccessmenu/
DSCfunctionsandtoconfirmselections.
8.
16/+—Whenpoweredonpresstoswitchbetween
prioritychannels.
9.HI/LO—PresstoswitchbetweenHigh(25W)and
low(1W)transmitpower.
10.
DIS
TRESS—Liftupthespringloadedcoverand
pressthisbuttontomakeaDSCdistresscall.
11.
ChannelUpandChannelDown—Changesthe
channelupordown.
12.
V
OL/SQ—Pressbuttontoswitchbetweenvolume
andsquelchcontrol.
13.
Built-inspeak
er
5.2PoweringtheBasestation
TheBasestationautomaticallypowersupwhen
connectedtoasuitablepowersupply.
TheBasestationispowereddownbyunpluggingfrom
thepowersupplyor,ifapplicable,bytrippingit’scircuit
breaker.
Poweringthehandset
WiththeBasestationpoweredOnandtheHandset
connected:
1.PresstheP
owerbutton,locatedonthetopofthe
Handset.
TheHandsetwillpoweron.
2.TopowerofftheHandset,pressandholdthe
P
ower
buttonforapproximately3seconds,untilthescreen
turnsoff.
34
81377-1-en_US_PRINT.pdf 34 12/21/2017 9:05:37 PM