Raymarine RAY91 - Enabling and Disabling the Internal GNSS (GPS); Selecting GPS Information to Display; GNSS (GPS) S Et U P

5.
14GNSS(GPS)setup
IfyourradioincludesaninternalGNSS(GPS)receiveror
ifyourradioisconnectedtoareceiveroverNMEA0183
orSea Talkng®,theradiocandisplayrelevantposition
information.
Thefollowinginformationcanbedisplayed:
•latitude
•longitude
•UTCtime
•COGandSOG
Whenpositiondataisavailablethesatelliteiconis
displayedonscreen.
Ifnopositiondataisavailablethenthelatitude,longitude
andtimecanbeenteredmanuallysothatitcanbe
includedinDSCdistresstransmissions.
Positiondatareceivedfromothervesselscanbe
displayedonaconnectedRaymarine®multifunction
display.
Enablinganddisablingtheinternal
GNSS(GPS)
FromtheGPSset-upmenu:
Menu>Set-up>GPS
set-up
1.Select
InternalGPS.
SelectingInternalGPSwillswitchtheinternalGNSS
(GPS)receiverOnandOff.
NoGPSpositiondata
IfnoGPSdataisavailableorGPSdatabecomes
unavailable;after10minutesanaudiblewarningis
sounded,theGPSiconflashesandtheNopositiondata
messageisdisplayed.
OncethewarninghasbeenacknowledgedtheGPS
iconwillcontinuetoflash.TheNopositiondata
warningisrepeatedevery4hoursifpositiondataisstill
unavailable
,hasnotbeenenteredmanuallyorhasbeen
enteredmanuallybutover23.5hoursago.
Ifpositiondatahasbeenenteredmanuallythedisplay
alternatesbetweendisplayingthemanualpositionand
timeandtheManualPositionmessage.ifthemanually
enteredpositionhasnotbeenupdatedinthelast4
hourstheGPSiconflashesandanaudiblewarningis
sounded.Thiswarningwillberepeatedevery4hours
untilpositionismanuallyupdatedorGPSpositiondata
becomesavailable.
Wherenopositiondataisavailableorhasnotbeen
manuallyupdatedfor23.5hoursthenpositiondatawill
changeto‘9’sandtimewillchangeto‘8’s.
Enteringpositionmanually
IfGPSpositiondataisnotavailableitcanbeentered
manually.
Fromthe
GPSset-upmenu:Menu>Set-up>GPS
set-up.
1.SelectSetmanualposition.
TheManualpositionscreenrequiresyoutoinput
latitude,longitudeandUTCtime.
2.UsetheR
otaryknobtocyclethroughtheavailable
numbersandpress
OKtoconfirmeachnumberand
movetothene
xtdigit.
3.Whentherelevantinformationhasbeenentered
select
OKtoconfirmthedetails.
SelectingGPSinformationtodisplay
Y
oucanchangetheGPSdatathatisdisplayedonthe
Homescreen.
Fromthe
GPSset-upmenu:Menu>Set-up>GPS
set-up.
1.SelectHomescreendisplay.
2.Selecttherequiredoption:
•Location&time
•Location&COG/SOG
TheHomescreendisplayoptionisalsoavailablefrom
theDisplayset-upmenu
Settingtimeformatandoffset
Y
oucanchangetheFormatandOffsetthatisappliedto
thetimedisplayedonscreen.
Fromthe
Unitsmenu:Menu>Set-up>Units.
1.SelectTimeformat.
2.Selectthedesiredformat:
•12hour
•24Hour(default)
3.SelectTimeoffset.
4.Adjusttheoffsettothedesiredvalueusingthe
R
otaryknoborthe
ChannelUpandChannelDown
buttons.
5.Select
OKtoconfirmtheselection.
42
81377-1-en_US_PRINT.pdf 42 12/21/2017 9:05:37 PM