Raymarine RAY91 - Automatic Transmitter Identification System (ATIS)

1.Usingthesuppliedmountingtemplate
,markthe
locationofthecutoutandfixingholesonthe
mountingsurface.
2.Usinga89mm(3½in)holesaw,drilloutthecentre
cutoutareaindicatedonthemountingtemplate.
3.Drillholesforthefixings,usingadrillwithasuitable
sizedbit.
4.Ensurethattheunitfitsintotheremovedareaand
thenfilearoundthecutedgeuntilsmooth.
5.Peelthebackingoffofthesuppliedgasketandplace
theadhesivesideofthegasketontotherearofthe
speaker,pressingfirmlyontotheflange.
6.Connecttherelevantcabletothespeaker.
7.Slidethespeakerintoplaceandsecureusingthe
fixingsprovided.
8.FittheBezel,ensuringitclipsintoplaceonall4sides.
24
81377-1-en_US_PRINT.pdf 24 12/21/2017 9:05:36 PM