Need help?Do you have a question about the Raysharp D6004 and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Audio Output | 1 channel |
| USB Interface | 2 USB 2.0 ports |
| Video Compression | H.264 |
| Power Supply | DC 12V/2A |
| Hard Drive | 1 SATA HDD (up to 6TB) |
| Network Interface | RJ45 10/100Mbps |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
Lists the key features and capabilities of the DVR system.
Describes the front panel layout, buttons, and indicators of the DVR.
Details the various input/output ports and connectors on the rear of the DVR.
Explains the operation and button functions of the infrared remote control.
Instructions on how to install a hard disk drive into the DVR.
Steps for connecting cameras and a monitor to the DVR system.
Information on connecting an optional VGA monitor for video output.
Guidance on connecting the power adapter to the DVR.
How to view the DVR's firmware version and release date upon startup.
Process of the DVR detecting the installed hard disk drive.
Instructions for formatting a new hard drive before use.
How to navigate through the DVR's main menu and options.
An overview of the DVR's menu directory and available settings.
How to configure camera settings, including turning channels on or off.
Settings for configuring recording channels and modes.
How to set the frame rate for recording to optimize image quality and storage.
Options for adjusting video quality to balance image clarity and disk space.
Customizing the recording schedule based on time and events.
Configuring sensor-triggered recording and alarm times.
Setting up external hardware sensors for alarm and recording triggers.
Configuring motion detection sensitivity and areas for each camera.
Managing hard drive status, size, usage, and formatting options.
How to change the DVR's administrator password for security.
Adjusting the system's date and time settings.
Functionality to hide specific camera channels during monitoring.
Configuring audio input/output settings for recording audio.
Setting up PTZ control parameters like speed and protocol.
Adjusting image parameters like contrast, brightness, hue, and saturation.
Enabling or disabling password prompts for DVR control.
Enabling or disabling audible feedback for button presses.
Setting the display duration for each camera in auto-sequence mode.
Selecting the appropriate VGA resolution for connected monitors.
Configuring network settings for internet and local area viewing.
Setting up IP address, subnet mask, and gateway for network connectivity.
Changing the On-Screen Display (OSD) language.
Setting up Dynamic DNS service for remote access.
How to back up recorded video events to external storage devices.
Restoring the DVR to its original factory settings.
Selecting the video output standard (NTSC or PAL).
How to initiate recording manually or based on schedule.
Settings for enabling and managing audio recording with video.
How to stop the recording process, with password protection options.
Table showing estimated recording times based on quality and HDD size.
How to enter playback mode and view recorded events.
Methods for searching recorded video by event list or time period.
Instructions for installing the PC viewer software drivers.
Overview of the PC viewer software's interface and button functions.
Operating the PC viewer software in HDD playback mode.
Playing back recorded files from USB or CD/DVD devices via PC software.
Remote playback of DVR recordings over a network.
Detailed technical specifications including video, audio, and network features.
Visual diagrams showing how to connect the DVR system components.
Details of optional accessories that may be included with the DVR.
To Next Page