Raysharp D6004 - Getting Started with the DVR; Firmware Version Check; Hard Drive Detection; Formatting the Hard Drive

User Manual
5
Chapter 4: Starting the DVR
4.1 Firmware Version
4.2 Detecting Installed Hard Drive
4.3 Format Hard Drive
DVR will detect the installed hard drive and
display the hard drive information.
When the DVR detects a new hard drive, you
will be prompted to format the hard drive before
using the DVR.
Press [SEL] to format or press [MENU] to
cancel.
After connecting the power adapter and turning
on the power button, the system will boot-up and
display the version and released date of the DVR
firmware.
V1.9
V-EN-BG
2008.2.23
CHECKING HDD……
MASTER [WDC WD3200AAJB-00T]
SLAVE……
CHECKING HDD……
MASTER [WDC WD3200AAJB-00T]-NEW-DVR
FORMAT HDD CONFIRM
(SELECT) FORMAT / (MENU) CANCEL?