F.2 Show Ground Warning
Enable or disable the warning message, when the instrument is powered on, by entering the
Service Code 0200#
Select Yes to enable the message
Select No to disable the message.
If the warning message is enabled, it will be
displayed at every boot-up of the
instrument and the message must be
acknowledged to continue.
F.3 CSV Separator
For the export of the data in a csv-file
1
you are able to change the separator.
You can set the CSV Separator with the following Service Codes:
• CSV Separator ';' Code 2010# (as seen
in example)
• CSV Separator ',' Code 2011#
• CSV Separator '\t' Code 2012#
1 Have a look on page 67 how to export the data in a csv-file.
To Next Page
Loading...