8.2.7.1.2 About
Choose this menu to get information about
the instrument like firmware version and
serial number.
8.2.7.1.3 Clock
Use this menu, to set date and time. This is
important for your data sets, because your
measurement will contain a time stamp.
8.2.7.1.4 Cursor
Lower versions than 0.8.8 of the Firmware had an option to activate a cursor of a USB mouse.
This option is no longer needed in newer firmware. It will automatically recognize it if you connect a
USB-Mouse or a Track ball and a mouse cursor will be visible during the motion of the mouse. The
instrument can then be fully controlled by the mouse.
To Next Page
Loading...