8.3.1.1 New test object
Creating a new test object
After clicking on New test object the
following screen is visible:
Just tap on the input window you would like
to change and a new window will open with
a keyboard
1
8.3.1.2 Load from Archive
If the test object was created and stored to memory from an earlier measurement, select
Load from Archive .
Now you can load an existing test object
from the memory on the instrument or from
a USB-key, if a USB-key is connected
1 It's also possible to connect an external USB-Keyboard or Mouse to control the CAPO.
To Next Page
Loading...