Raytech CAPO 2.5 - Operation Elements; Capo 2.5

Preliminary
7 Operation Elements
7.1 CAPO 2.5
1: Main Input
Connect the power cable to the Main Input.
Press the Main Switch to switch the CAPO on / off.
2: Main Switch
Press to power the CAPO on / off.
3: Emergency Stop
Press to stop: The measurement will stop and immediately switch off the high voltage.
Turn clockwise to release. The device will remain in a safe mode state.
90315-1.2 Instruction Manual CAPO
Page 33 of 117