Overheating:
If the CAPO is overheated (e.g. due to high
current, high output voltage over a long period of
time) the red symbol appears.
The CAPO protect itself, it stops the
measurement and will not allowed to start a
measurement till the temperature dropped to a
normal value.
H.1 Touch Panel does not work
Connect a USB mouse to the USB port and control the instrument with it.
The instrument will automatically display a cursor and everything can be done by mouse.
See chapter 8.2.7.1.4 Cursor on page 59.
Try to recalibrate the touch panel: See chapter F.1 Calibrate Touchscreen on page 104.
H.2 USB Memory Stick does not work
There are a few unsupported memory sticks available on the market. Please use another model or
brand and try again.
1
1 Depending on the type of formatting of the USB-stick, it can take up to 15 seconds until the stick is recognized. But this is really
seldom.
INFO:
INFO:
The CAPO is designed to be trouble free. If problems or questions do arise,
please contact your nearest representative or our service support group in
Switzerland
To Next Page
Loading...