4.2 Advantages & Features
Built-in Standard Capacitor
Power Factor / Tan δ reading
Test Frequency 10Hz to 400Hz
Internal thermal printer
Microprocessor based system with internal storage for over 10000 test results
Data exchange via USB Key or USB / RS232 Connection
Storage and Printing of test results
Complete automatic calibration system and system diagnostics
Temperature channel
Standard USB 2.0 & RS232 (serial) Interface
Color LCD with backlighting and touch screen
Panel mounted Emergency Stop Switch
Mounted in rugged case for field testing
2 Years standard warranty
High voltage excitation current features
Multiple frequency measurements
Reactance and quality factor reading
4.3 System Details
System Check:
The system is designed to be used with AC Voltage power sources between 85 to 264VAC, 47 to
63Hz. The CAPO performs a self-check each time that it is powered on. The User should always
visually inspect all connectors, cables and devices to be measured to avoid any safety issues.
To Next Page
Loading...