G Error Messages
Raytech instruments are designed to be precise, rugged and trouble free. In most cases, many
operators will never see any error messages.
Below is an example of a message:
The emergency switch is activated.
In this condition it is not possible to start a
measurement.
Exit this message screen by touching OK
without releasing the emergency switch.
The system will revert to a pretest or main
screen similar to the one shown:
Because the emergency switch is still
pressed, you are not able to start a new
measurement.
All other features of the system such as
storing, printing are still active.
Turn the Emergency Stop button clockwise
to release.
To Next Page
Loading...