÷
÷
• SYMPTOMS
TV shuts off.
Closed caption is not
activated.
CAUSE
TV station stopped broadcasting.
Sleep timer is set.
TV station experiencing problems or
program tuned is not closed
captions.
POSSIBLE SOLUTIONS
Tune new channel.
Set Sleep Timer to "0".
PAGE
19
21
Try another channel. 19, 21
Check CATV connection of VHF/
TV signal is weak. UHF antenna, reposition or rotate 12, 14
antenna.
The TV/CAP/TEXT button is not Press the TV/CAP/TEXT button to
depressed, turn on the closed caption. 21, 22
RECORDING
TV recording does not Place a piece of vinyl tape over
work. the hole.
Reset the present time.
Timer recording does not
work.
The video cassette's erase
prevention tab is broken off.
The time is not set correctly.
The recording start/end time is not
set correctly.
The TIMER REC button has not
been pressed (the T.REC indicator is
not lit.).
Reset the start/end time.
Press the TIMER REC button (the
T.REC indicator is lit.).
PLAYBACK
35
18
43, 44
44
Noise bars appear on the
screen.
Tape is old or worn. Replace the tape. --
Tracking adjustment is beyond range Adjust tracking manually using the
of automatic tracking circuit. SET/TRACKING +/- buttons on 37
the remote control.
Video heads are dirty. Clean the video heads. 52
REMOTE CONTROL
Remote control does
not operate.
The remote control is not aimed at
the sensor.
Distance is too far or too much light
in the room.
There is an obstacle in the path of
the beam.
The batteries are weak.
The batteries are not inserted
correctly.
Aim the remote control at the 10
remote sensor.
Operate within 15 feet or reduce
the light of the room. 10
Clear the path of the beam. 10
Replace the batteries. 10
Insert correctly. 10
÷
51
TO9084 (48-54) 51 _) 7/5/00, 3:08 PM
To Next Page
Loading...
