RCA T09084 - Picture Control Adjustments

÷
PICTURE CONTROL ADJUSTMENTS
Picture controls are factory preset but you can adjust them individually as follows:
ml
To display the picture adjustment screen, press
the MENU button. Press the SET/TRACKING
+ or - button to select the TV SET-UP option,
then press the ENTER button.
MENU -- SETtTRACKING + ENTER
%
r MENU
_I/TIMER RECSET
- l TV SET-UP
Zm\CH SET-UP
m AUTO REPEAT ON _OFF
m SYSTEM SET-UP
(+/-/ENTER/MENU)
Press the SET/TRACKING + or - button to
select the PICTURE option, then press the
ENTER button.
-- SET/TRACKING+
ENTER
%
TV SET-UP
mV-CHIP SET
•J!ON/0FF TIMER
-/I\PICTURE
(+/-/ENTER/MENU)
÷ ÷
BRIGHTNESS
rPress the ENTER button until "BRIGHTNESS" appears
on the screen, then press the SET/TRACKING + or -
button to adjust the brightness of the picture. When
the SET + button is pressed, the darker portions of
the picture become lighter.
ENTER --SET/TRACKING-I-
(+/-/ENTER/CANCEL/MENU)
CONTRAST
Press the ENTER button until "CONTRAST" appears
on the screen, then press the SET/TRACKING + or -
button to adjust the contrast of the picture. Pictures look
sharpest in the daytime (bright light) by increasing the
contrast. At night (dim light), the sharpest picture is
obtained by reducing the contrast.
ENTER --SET/TRACKING+
NOTE: The CONTRAST default
setting is set to maximum
at the factory.
Ii
32
T09084 (32-47) 32 _ 715/00, 3:05 PM