RD Instruments WorkHorse Sentinel - Set the ADCPs Clock

WorkHorse Sentinel User's Guide
P/N 957-6163-00 (January 2001) page 29
11.3.2 Set the ADCP’s Clock
The second step in the Deployment Wizard will set the ADCP’s clock to the
computer’s time and date using the TS-command. For more information on
the TS-command, see the Command and Output Data Format Guide. If you
want to skip this step, check the Skip box or click Next to begin setting the
clock.
NOTE. WorkHorse time is set from your computer’s time. Be sure your
computer is set to the time appropriate for your deployments before you
use WinSC to start data collection.
Figure 13. Deployment Wizard – Setting the Clock