RDS PS 8000 User Manual

2 - Operation
The "TO ADD" volume will then count down and the screen will display "STOP
INFILL". If a Shutoff Valve is fitted, filling will cease automatically when the "TO ADD"
volume reaches zero. You can also press at any time to stop filling. An audible
alarm will sound and filling will stop.
2.8 Part / Total Accumulation and RPM display
You can record the area and volume sprayed for a particular job using the "PART"
Total function. In addition the area and volume will be recorded to the "TOTAL"
memory register.
1 Select the "INFO" screen to display the accumulated totals and the RPM display.
NOTE: If more than one tank is enabled, there is a separate screen page for each tank (as
for the MAIN screen). Press the INFO menu key repeatedly to cycle between each
page.
2 Select 'PART' to display the Part Area and Part Volume accumulation,
Select "TOTAL" to display the Total Area and Total Volume accumulation.
2.8.1 Reset Totals
1 Select the "PART" or "TOTAL" display.
2 Press the RESET key.
3 Press to zero the totals or press ESCto return to the "INFO" screen.
20

RDS PS 8000 Specifications

General

Brand	RDS
Model	PS 8000
Category	Controller
Language	English