Reach RT-PoE5 - Appendix C - Specifications; Measurement Specifications; Limits

Reach PoE5 Tester Manual 1.8 03/25/2021 Page 42
Appendix C - Specifications
C.1 Measurement Specifications
Voltage Measurement
± 2% or ±0.5V whichever is greater
Current setting, power
load
± 2% or ±2mA whichever is greater
5mA load guaranteed less than 5mA
10mA load guaranteed greater than 10mA
Current setting, class load
± 2% or ±0.5mA whichever is greater
All specifications subject to change at any time without notice.
C.2 Limits
SET command
1000mA per pair, or 2000mA total
PWR command
50W per pair, or 100W total
All specifications subject to change at any time without notice.