Reach PoE5 Tester Manual 1.8 03/25/2021 Page 6
2.3. Features
IEEE signature options: nominal, low, and over-spec capacitive.
Classification 0 through 8, and autoclass (all nominal).
Passes 10GbE traffic from each test port to the neighboring port, isolated from PD load
(1-2, 3-4, etc.).
Relay data path for compatibility with Phy-based cable diagnostics.
Low cost compared to compliance-level PD emulators.
Universal voltage (110/220) AC power supply.
Serial RS-232 console control.
2.4. Dimensions
The unit fits in a standard 19" rack using screw-on ears.
Case outside dimensions are:
16.665" deep
17.30" wide (fits 19” rack; mounting ears provided)
1.74" high
2.5. Electrical Characteristics
The RT-PoE5 is powered via a locking power DIN 4 pin connector and requires a power
supply capable of supplying 12VDC at 11.5 amps.
The unit comes with a worldwide universal AC input power supply brick. Its
characteristics are:
85-264VAC input, 90% efficient, 0°C to 40°C operation, IEC320/C14 input
2.6. Environmental
Operating temperature range is 0°C to 40°C. Storage range is -30°C to 70°C.
Humidity is 85% maximum, non-condensing
2.7. Warranty
The RT-PoE5 is warranted by Reach Technology against manufacturing defects for one
year.
2.8. Operating Software
No Software license is required.
To Next Page
Loading...