• The full inflation mode is activated automatically each time
the pump is switched on, as indicated by the flashing LED.
When the maximum air level is reached, the pump
automatically switches to the last saved operating mode and
patient weight settings.
• The full inflation mode can be activated by the user in order
to obtain a flat mattress surface that facilitates carrying out
care activities for the patient, facilitating his descent / entry
onto the mattress, etc. After pressing the button, the LED
will light up and stay lit. After 20 minutes, the pump will
automatically return to the previously selected operating
mode.
• Only in model MD090-1301BTRF - The full inflation mode is
activated automatically each time the bed headrest is raised
by approx. 45°. It is to protect the patient against contact
with the bed surface. The code L.H. will then appear on the
pump display. After lowering the headrest the pump will
automatically return to the previously selected operating
mode.
To Next Page
