Redarc TVMS Rogue - System Configuration; Configurator App Usage

34 | System Configuration
SYSTEM CONFIGURATION
Once the TVMSRogue installation is complete, it needs to be configured using the RedVision
®
Configurator App which connects to the system via the RedVision
®
Display. The App defines the
behaviours of each device in your installation – This is important to make sure the system operates
correctly and safely.
GET THE REDVISION
®
CONFIGURATOR APP
Download the free REDARC RedVision
®
Configurator App to Configure the settings of your
TVMSRogue using your smartphone via Bluetooth
®
.
GET THE REDVISION
®
CONFIGURATOR APP
The Configurator App and its interactions with the TVMSRogue have not been tested
on all smartphone models. Visit the application pages within your App store to view
compatibility details.
WARNING: When using the REDARC Configurator App, ensure that you DO NOT configure
important vehicle safety features (such as lights or mechanical devices) in such a way that they
may turn Off/On unintentionally while the vehicle is in motion.
NOTICE
 The Configurator App allows modification to the core functionality of your RedVision
®
system.
Only use this app if you have read and fully understand all instructions in this manual.
 Ensure that the channel and master override switches are turned Off after use to prevent
accidental operation of the channel and flattening of the Auxiliary Battery.
TURN OFF DISPLAY KEY SOUNDS
1. On the RedVision Display, navigate to Display Settings.
2. Press the Screen Settings Soft Key (
 ).
3. With Key Sound selected, press (/) to toggle key sounds On/Off.