REDEX SRP0 - Output Flange Connection

SRP - User manual
Ref.: RX182/006
Version 01/2017 - English
This document must not be reproduced nor information therein disclosed without our authorization
Page 16 / 28
6.2 Output flange connection
6.2.1 Size 0, 1, 2, 3, 4
Size
Nbr of screws x D2f
(class 12.9)
Tightening
torque
(Nm)
Pinning
hole
SRP0
15 x M6
17
1 x 7 mm
SRP1
11 x M8
41
1 x 8 mm
SRP2
11 x M10
83
1 x 10 mm
SRP3
3 x 4 x M16
355
-
SRP4
3 x 4 x M20
690
-
NOTE:
For units with size 0, 1 & 2, we recommend pining the accessory on gearbox output according to
ISO9409 norm recommendations.
6.2.2 Size 5 and 6
Size
A
B
C
D
E
F
Nbr of screws x D2f (class 12.9)
SRP5
112H6
99H6
10
46
8
97
5 x M16x30 at 72° on Ø68.5
SRP6
132H6
115H6
12
53
10
112
5 x M20x35 at 60° on Ø 87