8540573 • 16/09/2016 • Rev.20 27
SELECTION OF THE MAXIMUM DURATION AND TYPE OF MUTING
The inputs of the JANUS light curtain receiver make it possible to configure the various types of
Muting available and the maximum duration of the Muting condition (timeout).
At power-on, for correct functioning, the various inputs must be connected as indicated below.
Table 12 - Models with 2 sensors
where: t1 = 30 sec; t2 = 90 min
NOTE: For the MT (with 2 sensors) and ML models, pin 7 and 8 must not be connected.
Concurrent mode
(within 4sec)
Concurrent mode
(within 4sec)
Table 13 - Models MI and models MT with 4 sensors
where: t1 = 30 sec; t2 = 90 min
OVERRIDE CONFIGURATION
Selection override with spring return key
Selection override with push button (switch)
To Next Page
Loading...
