Need help?Do you have a question about the Reflex Control Basic and is the answer not in the manual?
General| Device Type | Remote Control |
|---|---|
| Compatibility | Universal |
| Frequency | 433.92 MHz |
| Range | 30 meters |
| Battery Type | 2 x AAA |
| Dimensions | 120 x 40 x 15 mm |
| Weight | 50 g (without batteries) |
Details on the external mains adapter used for powering the Reflex Control Remote.
Step-by-step guide to connecting the RS-485 cable to the Reflex Control Basic controller.
Instructions for connecting the RS-485 cable to the Reflex Control Touch controller.
Guide to activating/deactivating RS-485 network terminators using DIP switches on Control Basic/Touch.
Steps to establish an internet connection for the Reflex Control Remote using a Local Area Network (LAN).
Instructions for connecting the Reflex Control Remote to the internet using a GSM connection, including SIM card and aerial setup.
How to configure the Reflex Control Remote for LAN operation, including changing IP address and setting DHCP mode.
Procedure to set up the Reflex Control Remote for GSM operation, including network provider settings.
Contact information for Reflex Customer Service, including switchboard, extensions, fax, and email.
To Next Page