Reflex Control Basic User Manual

Information concerning the operating manual
Control Remote — 09.11.2015 German — 3
1 Information concerning the operating manual
The electric connections and the wiring of the device must be executed by a specialist in accordance with all applicable national and
local regulations.
Note!
Every person installing this equipment or performing any other work at the equipment is required to carefully read this
operating manual prior to commencing work and to comply with its instructions. The manual is to be provided to the
device operator and must be stored near the device for access at any time.
2 Models
The Reflex Control Remote is used for monitoring and control of the pressurising and degassing stations via an existing internet
connection.
The following device groups with control unit are suitable for expansion with the Reflex Control Remote.
 Reflexomat
 Reflexomat Compact
 Variomat
 Variomat Giga
 Servitec
 Fillcontrol Auto
 Fillcontrol Auto Compact
 Fillcontrol Plus
The Reflex Control Remote supports the following controllers
 Reflex Control Basic
 Reflex Control Touch
The Reflex Control Remote can create a connection to the Internet in two ways.
 Local Area Network (LAN)
 Global System for Mobile communications (GSM)
Note!
• The Reflex Control Remote is connected to the control unit by the user.

Reflex Control Basic Specifications

General

Brand	Reflex
Model	Control Basic
Category	Remote Control
Language	English