the production and production of the plate ribs and hook ribs of the long hook plate.
The heightened design of the slab bar rack and the rack box can meet the production of slab bar
and hook bar of long hook plate. The auxiliary material hook design can realize the non-stop
operation of the finished slab bar hook bar packaging and handling.
The operation table adopts touch screen operation, which is convenient and intelligent.
The air compressor adopts a 7.5KW red five-ring high-power, large-tank air compressor to ensure
a stable and sufficient air source for the equipment.
Working principle: Bundles of coils and snails are placed on the disc wire rack and pass through
the guide wheel. The pre-feeding mechanism sends the steel bars into the host for the first time (the
pre-feeding mechanism is not used during normal work), and the pre-adjusting mechanism removes
the steel After pre-straightening, the traction mechanism is sent to the straightening mechanism to
straighten the steel bars, and the steel bars are sent to the bending part for bending. After bending
and forming, the shearing mechanism cuts the steel bars into shape. When making slab bars and
hook bars, the bending part bends the first hooks of the slab bars and hook bars, and then traction
continues to feed the material to the slab bar rack. When the set length is reached, the shearing
mechanism cuts the bars and passes The return mechanism clamps and provides power for reverse
feeding, and the second head hook is bent into shape by the bending mechanism again, and the plate
rib material rack box is opened to put down the finished plate ribs and hook ribs.
To Next Page
Loading...