Reflex GX616 - Electrical Structural Features and Working Principles

·
2.2. Electrical structural features and working principles
2.2.1 Real shot diagram of electrical control cabinet electrical system structure
layout
described as follows:
"1": indicates the main power switch; "2": indicates the control power switch;
"3": Means the intermediate relay for control. The PLC realizes the control of the solenoid valve of the
equipment by turning on and off the power supply of the intermediate relay coil;
"4": Represents the isolation transformer for control, which provides 220v single-phase power supply for PLC,
switching power supply, and control cabinet cooling fan.
"5": Represents the main contactor of AC power supply. When the key switch of the operating console is
closed, the main contactor coil of the AC power supply will be energized and closed, and all loads and control
power circuit breaker switches will be energized.
"6": indicates the forward rotation AC contactor of the shearing motor; "7": indicates the AC contactor of the
shearing motor brake coil;
"8": indicates the pre-feeding forward rotation AC contactor; "9": indicates the pre-feeding reverse AC
contactor;
"10": Represents the programmable logic controller PLC, the core component of the equipment. It can
communicate with the touch screen/servo driver to realize the size and angle control of the production steel
bars.
"11": Represents the PLC expansion module, which mainly realizes the control of the equipment speed by
sampling the potentiometer.
"12": indicates the control power signal wiring terminal; "13": indicates the traction motor servo driver;
"14": indicates the servo driver of the return motor; "15": indicates the servo driver of the bending motor.
"16": Represents the main power incoming wiring board. "17": Represents the motor wiring board.
"18": Represents the console control circuit wiring board
2.2.2 Working process and principle of equipment and electrical appliances:
Manually feed the steel bars into the pre-feeding rollers and press them by cylinders; click "Pre-feeding motor
OperationManualReflexFastFormGX616CNCRebarStirrupBendingMachine