Reflex GX616 - Main Purpose and Scope of Use; Structural Features and Working Principle; Mechanical Structure Features and Working Principle

1.2. Main purpose and scope of use
The automatic CNC steel bar bending machine REFLEX -FASTFORM -GX616 is mainly used for mass
production of steel bar stirrups , hook bars , slab bars , etc . in infrastructure construction such as
highways, railways, bridges, tunnels, and housing construction
2.Structural features and working principle
2.1. Mechanical structure features and working principle:
Mechanical structure features: This product consists of 1 disc wire rack, 2 pre-feeding mechanism, 3
pre-adjusting mechanism, 4 traction ns. The raw materials used are 6-16 discs and snails.
mechanism, 5 straightening mechanism, 6 shearing mechanism, 7 bending mechanism, 8 return
mechanism, 9 plate ribs It is composed of material rack, 10 consoles, 11 air compressors and other
parts.
The pay-off rack with brake disc can effectively prevent the equipment from starting and
stopping during fast operation, which may cause problems such as disordered feeding of steel bars.
The pre-feeding mechanism can assist the rebar to penetrate the equipment for the first time and
reduce the labor intensity of workers.
The pre-adjustment mechanism pre-adjustment wheel is made of alloy tool steel, which is
resistant to abrasion and impact.
The traction mechanism is equipped with a high-power servo motor to ensure the smooth
operation of the traction. The square-head transition connection is adopted, and the strength is more
than ten times that of the traditional flat key connection. The traction wheel and the straightening
wheel are made of alloy tool steel, which is resistant to wear and impact.
The straightening wheel of the straightening mechanism is made of alloy tool steel, which is
resistant to abrasion and impact.
The shearing mechanism adopts a split thick blade design and is bolted to the blade seat. At the
same time, the thickness reaches 40mm, which is quick to replace and easy to maintain, which
greatly reduces the maintenance cost of the equipment.
The bending mechanism adopts the forming wheel to bend to make the bending steel bar pattern
more standard . At the same time, it adopts double-stroke bending and expansion , which can meet the
production and production of the plate and hook bars of the long hook plate.
The return mechanism adopts double-stroke return expansion and contraction, which can meet
OperationManualReflexFastFormGX616CNCRebarStirrupBendingMachine