Equipment Operation
6-25
Blower
The blower’s function is to evacuate
any fumes and engine exhaust gases
that have accumulated in the lower
bilge. The blower must be activated
at least 4 minutes prior to starting
the engine. Check the ventilation
ducts and black bilge hose to
ensure they are not obstructed.
Be careful not to step on the bilge hoses when performing sump
maintenance. The blower should be used below cruising speeds. The
blower is located in the sump.
Read and understand the following warning:
!
WARNING
GASOLINE VAPORS CAN EXPLODE. BEFORE STARTING
ENGINE, OPERATE BLOWER 4 MINUTES AND CHECK
ENGINE COMPARTMENT FOR GASOLINE LEAKS OR
VAPORS. RUN BLOWER BELOW CRUSING SPEED.
To Next Page
Loading...
