Equipment Operation
6-93
Seating-Double Helm w/Flip-Up Bolster
The double wide
helm seat can be
moved forward or aft
using the momentary
switch located at the
helm starboard side
panel.
In addition, the
helm seat height
can be adjusted
using an additional
momentary switch at
the same location. See the switch panels below.
Also, located at the forward end of the seat is a fl ip-up bolster which
can afford you additional visibility for docking and maneuvering in
tight quarters. Along with the bolster cushion in its up position, the
operator gains additional standing leg room.
TYPICAL BOLSTER
To Next Page
Loading...
