Equipment Operation
6-113
Toilet-Chemical
Before each outing make sure
the chemical toilet is fi lled with
the proper chemicals, paper
is available, and if a holding
tank is installed make sure it
is empty.
To fill the toilet read and
follow all the manufacturer’s
recommendations for mixing
the solution. Use the fill to
pour in the deodorant chemical
and water. By pushing down on
the bellows the chemical mix is
released to rinse and help fl ush
the toilet bowl. When the fl ush
valve is pulled forward the toilet bowl waste water empties into the
holding tank. Close the fl ush valve after each use.
The chemical toilet features a holding tank level indicator. When full
the lower holding tank must be emptied by fi rst separating it from
the upper toilet bowl assembly. Before proceeding, ensure the fl ush
valve in completely closed. Find the latches that allow the 2 units to
be separated. Once separated, fi nd an environmentally friendly facility
to dispose of the waste.
Fill
Bellows
Holding Tank
Typical Chemical Toilet
To Next Page
Loading...
