Cosmetic Care & Maintenance
7-53
Windlass-Anchor
Periodic care and maintenance is essential to keep the windlass oper-
ating effi ciently. Follow the tips below:
• After several anchor retrievals check all mounting hardware to
ensure everything is tight. Access to hardware may be gained
through the anchor rope locker.
• Wash down the entire anchor locker components after each cruise
especially in salt water usage.
• Ensure the anchor is secured by the pin and lanyard hook.
• Annually strip, clean and re-grease all external driveshaft compo-
nents with SFG synthetic grease containing PTFE or its equiv-
alent. Internal parts and bearings are lubricated and require no
further attention.
• For more information refer to the vendor’s operation manual
found in the owner’s information packet or contact your closest
Regal dealer.
To Next Page
Loading...
