DISCLAIMER
The information in this manual has been carefully checked and is believed to be correct. Regin, however, makes no warranties in regard to the
contents of this manual. Users are requested to report errors, discrepancies or ambiguities to Regin, so that corrections may be made in future editions.
The information in this document is subject to change without prior notification.
The software described in this document is supplied under licence by Regin and may be used or copied only in accordance with the terms of the
licence. No part of this document may be reproduced or transmitted in any form or fashion, electronically or mechanically, without the express,
written permission of Regin.
COPYRIGHT
AB Regin. All rights reserved.
TRADEMARKS
EXOdesigner, EXOreal, EXOrealC, EXOline, EXO4, EXO4 Web Server, Regio and Regio tool
©
are registered trademarks of AB Regin.
Windows, Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10, Windows Server 2003, Windows
Server 2012 are registered trademarks of Microsoft Corporation.
Some product names mentioned in this document are used for identification purposes only and may be the registered trademarks of their respective
companies.
May 2016
Latest revision: 3.1
Manual for products with software revision 1.4-1-00 or later
Functions described in this manual are handled through Regio tool
©
version 1.5-1-01.
To Next Page
Loading...
Need help?
General
