RCF manual Chapter 18 BACnet signal types 51
Chapter 18 BACnet signal types
BACnet In order to communicate via BACnet, the protocol has to be changed either via Regio tool
©
or via the parameter list in the display. Once the protocol has been set to BACnet, it can only
be switched back to EXOline and Modbus via the display.
Object type The BACnet types of the signals (types in the list below):
• Analogue inputs
• Analogue values
• Binary inputs
• Binary values
• Loop
• Multistate inputs
• Multistate values
• Device
Out_of_service The property out_of_service is not writable for all Object Types.
Commandable The value objects are not commandable (i.e. does not use a priority array).
EDE files EDE files for BACnet are included in the Regio tool
©
installation.
To Next Page
Loading...
